Dinghy

New Boat: CIY 16

The Calendar Islands Yawl 16

A Sail-and-Oar Dinghy for one or two people



The CIY 16 began as a 19 x 6 1/2-foot daysailer design with a deck and coaming with a bit of Herreshoff flavor. A friend who sails the Goat Island Skiff design by Michael Storer wanted a similar boat -- singlehanding, lightweight, lug rigged sail-and-oar dinghy -- but with a hull shape more amenable to Maine waters. I immediately thought of my CIY lines that I had drawn years ago and that had been sitting untouched and in need of inspiration. I had already put the lines into the computer so I scaled them down and reworked them to make this hull. The specs are:

LOA 15 1/2'
Beam 5' 1"
Displacement ~522lbs
Depth amidships 1'9"
DWL is 3'10" x 13'2"
Cp is 0.54


The hull has a wide plank keel for rolling the boat up and down the beach. The skeg is there for tracking under oars, but the cutaway allows the stern to come through the wind when tacking. The lines are fairly straight forward and full aft. In a breeze she will plane. Yet trimmed on her DWL, the transom is out of the water and the stem is in the water and she'll row fine with 10' oars so long as we keep her light. Construction will be 1/4" plywood: bottom and garboard stitch and glue style, with lapstrake sides, about 5 strakes total for topsides.



It's always fun designing something really new. The next steps are to put in all the planks in the model so look forward to that post. I'll be looking for someone to prototype the boat. Let me know if you are interested. Stay tuned!

New Stitch and Glue Dinghy



Congrats to Barbara Simon, the new owner of the Willard Beach Dory (WBD), a new stitch-and-glue dory skiff drawn by Roger Long who has retired and is off cruising. Roger left behind a few gorgeous designs for me to 'kit' and market as new boats, the (WBD) being one of them. The others are the YawlDory and a 16' Herreshoff-like double paddle canoe, which is a thing of beauty and may be the only paddle boat I end up putting in the catalog.

The WBD is out of 6mm plywood and will be rowed in and around Casco Bay. She'd be an ideal tender being light, maneuverable and a good load carrier. The oars are our custom spoon blade oars with high quality 14" leathers by Swanson Boat Company.



Stitch and Glue is a quick way to get a boat, but this project was a reminder that this type of construction can take longer than one thinks if you try to get a yachty finish: hiding the fiberglass tape and fillets takes some fairing. With lapstrake, there is a clean plank line to follow. However, the S and G structure is light and strong and relatively inexpensive as kits go.

What other S and G designs do people like that are not available as kits and should be?